Galvanized Steel Wire Strand

Products > Steel Wire For Cable > Galvanized Steel Wire Strand

Galvanized Steel Wire Strand

Galvanized Steel Wire Strand

Galvanized Wire Strand is made to ASTM B498; ASTM A 475; BS 183 etc. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. Galvanized wire for cable application is available in a Class A coating; Class B coating and Class C coating.

Class A coatings are smoother, however less corrosion resistant than heavy galvanized coatings and are often used in normal wire working applications. Some typical end users include cages, bucket handles, coat hangers and baskets.

Class B and Class C coatings are used in conditions where atmospheric corrosion is severe. End users include crop support wires where chemicals are used, pool fencing or chain mesh in coastal areas.

Additional Info

Diameter Range of steel wire: 1.57 -4.00 mm


Galvanised Wire Working Specifications

Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between standard, heavy galvanized and extra-high galvanized wire.

 

Nominal Diameter

Minimum   Coating Mass (g/m2)

Class A

Class B

Class C

over 1.6 mm up   to and incl. 1.90mm

210

420

630

over 1.90mm up   to and incl. 2.30mm

220

440

660

over 2.30mm up   to and incl. 2.70mm

230

460

690

over 2.70mm up   to and incl. 3.10mm

240

480

720

over 3.10mm up   to and incl. 3.50mm

260

520

780

over 3.50mm up   to and incl. 3.90mm

270

540

810

 

 

Nominal Diameter

Structure

over 1.6 mm up   to and incl. 1.90mm

1*3

1*7

1*19

1*37

over 1.90mm up   to and incl. 2.30mm

1*3

1*7

1*19

1*37

over 2.30mm up   to and incl. 2.70mm

1*3

1*7

1*19

1*37

over 2.70mm up   to and incl. 3.10mm

1*3

1*7

1*19

1*37

over 3.10mm up   to and incl. 3.50mm

1*3

1*7

1*19

1*37

over 3.50mm up   to and incl. 3.90mm

1*3

1*7

1*19

1*37

 

Tensile Strength (Mpa)

The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:

 

Nominal Wire   Diameter

Stress at 1%   Elongation (Mpa)

Class A

Class B

Class C

Extra-High

over 1.6 mm up   to and incl. 2.30mm

1310

1240

1170

1560

over 2.30mm up   to and incl. 3.05mm

1280

1210

1140

1560

over 3.05mm up   to and incl. 3.60mm

1240

1170

1100

1560

over 3.60mm up   to and incl. 4.80mm

1170

1100

1070

1560

 

Nominal Wire Diameter

Tensile Strength (Mpa)

Class A

Class B

Class C

Extra-High

over 1.6 mm up to and incl. 2.30mm

over 2.30mm up to and incl. 3.05mm

over 3.05mm up to and incl. 3.60mm

over 3.60mm up to and incl. 4.80mm

1450

1410

1410

1380

1380

1340

1340

1280

1310

1280

1280

1240

1770

1770

1770

1770

 

Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.

Nominal Wire   Diameter

10in   Elongation (%)

Class A

Class B

Class C

over 1.6 mm up   to and incl. 2.30mm

3

3

3

over 2.30mm up   to and incl. 3.05mm

3.5

3

3

over 3.05mm up   to and incl. 3.60mm

4

3

3

over 3.60mm up   to and incl. 4.80mm

4

4

4

 

Steel Chemistry

A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.

Tensile Grade

% Carbon

% Phosphorus

% Manganese

% Silicon

% Sulphur

Normal

0.5~0.85

0.035

0.5 ~1.10

0.10~0.35

0.045

 

Packing:
1) All the products are packed with seaworthy packing.
2) Customer’s special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.

 

FAQ

Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years. 

Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.

Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.

Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour

Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.

Q: What is the payment term?
A: T/T; L/C; D/P etc

Q: Free sample available?
A: Yes. Free sample within 2kg is available

Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit